KEM INJECT OXYDAMP- C | Synthetic Solution for Dampness - 10 Ltr

Availability: Only few left
Dispatched within: 5 days
Price: ₹ 4,000.00 4000.00
incl. 18% GST, excl. shipping costs

KEM INJECT OXYDAMP - C is a very low viscosity synthetic resin solution. It penetrates deeply into even the smallest capillaries and pores in building materials. Due to its very low density and a surface tension that is less than that of water, KEM INJECT OXYDAMP – C pushes water out of the capillaries. Capillaries treated in this way become lined and water repellent. The curing of the injected product is independent of the drying of the masonry. After its full cure, KEM INJECT OXYDAMP - C remains flexible, does not disintegrate or give rise to effloresce and does not affect steel reinforcement. KEM INJECT OXYDAMP - C is resistant to all of the usual aggressive masonry corrosives, such as mild acids, alkalis’ and salts both during application and after full cure.

quantity Qty
add to wish list

Description

KEM INJECT OXYDAMP – C Can also be applied using the low-pressure injection system for mitigating rising dampness in masonry walls.

Additional Information

Brand: Chembond

Pack Size: 10 Ltr

Other Details:

Precautions: After the application of KEM INJECT OXYDAMP - C, salts which are already present in the substrate can during the drying process cause efflorescence and have damaging effects. We recommend the application of KEM EPOXY GROUT ELV and the application of a coat of a KEM BRICKLINE 10 Plaster System. If cement-based systems such as sealing slurries or plasters are to be applied after KEM INJECT OXYDAMP - C has been applied, and then this should be done at the earliest two weeks after the application of the horizontal barrier. If applied earlier, discolorations may occur due to the migration of the KEM INJECT OXYDAMP - C.

Product reviews (0)

up
Shop is in view mode
View full version of the site
Ecommerce Software