Anti Weld Spatter - Silicone Based - 400 ml

Anti Weld Spatter - Silicone Based - 400 ml
Anti Weld Spatter - Silicone Based - 400 ml
Anti Weld Spatter is a no flash silicone-based formula that provides a protective coating to aid in the removal of weld spatter and helps to keep welding tips and nozzles clean. Prevents weld spatter from adhering to surrounding metals surfaces. Leaves a transparent, light yellow, tacky film that visually certifies proper coverage. High temperature based anti weld spatter. Prevents spatter adhesion on the base metal, thus eliminating grinding and chiseling. This product is highly heat-resistant and flameproof when applied as directed. Easily removed when welding is completed.

Availability: Big amount

Price: ₹ 360.00
incl. 18% GST, excl. shipping costs
Qty

Automotive Belt Dressing Spray (400ml)

Automotive Belt Dressing Spray (400ml)
Automotive Belt Dressing Spray (400ml)
PROTOCHEM BG 401 provides a temporary, synthetic treatment for worn belts that extends belt life by reducing slippage, hardening, glazing, dirt build-up and friction. Belt Dressing also helps eliminate annoying squeaks and squeals. It formulated with a tacky, non-drying, water-resistant synthetic polymer. Belt Dressing can be used on leather, rubber, canvas or fabric, and is ideally suited for flat, round and V-belts.

Availability: Big amount

Price: ₹ 360.00
incl. 18% GST, excl. shipping costs
Qty
  • new

Bike Chain Lubricant Spray (400ml)

Bike Chain Lubricant Spray (400ml)
Bike Chain Lubricant Spray (400ml)

PROTOCHEM CL 402 is a synthetic transparent lubricant for inside and outside surface of highly stressed components, chains and all kinds of wire ropes. It is resistant to the temperature from -400C to 2000C and has exceptional adhering, compression resistance, creeping and water repellent properties. It prevents elongation, friction, wear and act as noise muffing agent.

Availability: Only few left

Price: ₹ 400.00
incl. 18% GST, excl. shipping costs
Qty
  • new

Carburetor Cleaner Spray (400 ml)

Carburetor Cleaner Spray (400 ml)
Carburetor Cleaner Spray (400 ml)
PROTOCHEM TBC 301 spray is a non-chlorinated, quick drying, ready to use solvent. It is used to clean automobile equipment’s like a carburetor, throttle body, injectors, choke and for rapid removal of gum, lacquer, grease, oil, and dirt.

Availability: Big amount

Price: ₹ 400.00
incl. 18% GST, excl. shipping costs
Qty

Colour Spray Paints (400ml)

Colour Spray Paints (400ml)
Colour Spray Paints (400ml)
Protochem Spray Paints which Easily touch up portions of the paint with a smooth and pristine finish. The aerosol Paint leaves smooth evenly coated surface, unlike many rolled or brushed paints.

Availability: Big amount

Price: ₹ 220.00
incl. 18% GST, excl. shipping costs
Qty

Corrosion Protection Spray (400 ml)

Corrosion Protection Spray (400 ml)
Corrosion Protection Spray (400 ml)

PROTOCHEM LTP 901 is a heavy duty all purpose rust preservatives. It is a removable corrosion preventive which penetrates and forms a transparent coating that is recommended for the most severe environments. It provides excellent long-term outdoor weather protection withstanding up to 500 hours of salt spray test.

Availability: Big amount

Price: ₹ 420.00
incl. 18% GST, excl. shipping costs
Qty

Dye Penetrant Testing Spray (400ml)

Dye Penetrant Testing Spray (400ml)
Dye Penetrant Testing Spray (400ml)
Protochem Flaw Check Dye Penetrant is a red-colored liquid penetrant used for quick non-destructive testing, to detect a crack in Fabricated MS & SS equipment and machinery viz. Pressure Vessels, Reactors, Condensers, Heat Exchangers, Filters, Stirrers, Bridges and heavy structural fabrications. Many cracks in engineering materials cannot be detected by normal visual inspection. Such cracks are detected using a set of three products viz. Protochem Flaw Check Cleaner, Protochem Flaw Check Dye Penetrant & Protochem Flaw Check Cleaner. Protochem Flaw Check Dye Penetrant is liquid penetrant visible with natural white light formulated with special high boiling point hydrocarbons, surfactants, rust inhibitors and dyes.

Availability: Big amount

Price: ₹ 290.00
incl. 18% GST, excl. shipping costs
Qty

Electrical Contact Cleaner Spray (400ml)

Electrical Contact Cleaner Spray (400ml)
Electrical Contact Cleaner Spray (400ml)
PROTOCHEM ECC 302 spray is a quick drying high Di-electric strength ready to use solvent, designed to replace 1, 1, 1-T, CFC's and chlorinated solvents.

Availability: Big amount

Price: ₹ 264.00
incl. 18% GST, excl. shipping costs
Qty

Flaw Check Cleaner (400ml)

Flaw Check Cleaner (400ml)
Flaw Check Cleaner (400ml)
Protochem Flaw Check cleaner is a fast drying solvent cleaner, degreaser and excess penetrant remover for the nondestructive testing of metal surfaces by liquid penetrant inspection. Many cracks in engineering materials cannot be detected by normal visual inspection. Such cracks are detected using a set of three products viz. Protochem Flaw Check Cleaner, Protochem Flaw Check Dye Penetrant & Protochem Flaw Check Cleaner. Protochem Flaw Check Cleaner is powerful cleaner degreaser to remove dirt, grime, and contaminants. It is designed for the pre-treatment of the surface, prior to liquid penetrant inspection and to remove all visible, colored traces of the penetrant.

Availability: Big amount

Price: ₹ 252.00
incl. 18% GST, excl. shipping costs
Qty
  • new

Heat Resistant Spray Paint - 400 ml

Heat Resistant Spray Paint - 400 ml
Heat Resistant Spray Paint - 400 ml
Protochem Heat Resistant Spray Paints which Easily touch up portions of the paint with a smooth and pristine finish. The aerosol Paint leaves smooth evenly coated surface, unlike many rolled or brushed paints.

Availability: Big amount

Price: ₹ 576.00
incl. 18% GST, excl. shipping costs
Qty

Heavy Duty Cleaning & Degreasing Spray (400ml)

Heavy Duty Cleaning & Degreasing Spray (400ml)
Heavy Duty Cleaning & Degreasing Spray (400ml)

Citrus Cleaner is a unique, low VOC, citrus based, heavy duty general cleaning & degreasing spray that is extremely effective for dissolving and removing grease, oil, lubricants, adhesives, tar, and contaminants. Citrus Cleaner has controlled evaporation and is non-corrosive, non-abrasive, and non- staining. It features a pleasant citrus fragrance.

Availability: Big amount

Price: ₹ 300.00
incl. 18% GST, excl. shipping costs
Qty
  • new

Micro Crack Detection Spray (400ml)

Micro Crack Detection Spray (400ml)
Micro Crack Detection Spray (400ml)

Protochem Flaw Check Developer is a fast drying developer for the nondestructive testing of metal surfaces by liquid penetrant inspection.

Many cracks in engineering materials cannot be detected by normal visual inspection. Such cracks are detected using a set of three products viz. Protochem Flaw Check Cleaner, Protochem Flaw Check Dye Penetrant & Protochem Flaw Check Cleaner. Protochem Flaw Check Cleaner is powerful cleaner degreaser to remove dirt, grime, and contaminants. It is designed for the pre-treatment of the surface, prior to liquid penetrant inspection and to remove all visible, colored traces of the penetrant.

Availability: Big amount

Price: ₹ 270.00
incl. 18% GST, excl. shipping costs
Qty

Multi-Use Product Spray (400ml)

Multi-Use Product Spray (400ml)
Multi-Use Product Spray (400ml)
PROTOCHEM DW 10 is a multi-functional and multi-purpose fluid with ultra-low surface tension & superior capillary action to provide an unmatched surface wet ability, penetration, and coverage. It is silicone free, the non-toxic formulation for reopening jammed assemblies and for restoring electrical properties of electrical components.

Availability: Big amount

Price: ₹ 276.00
incl. 18% GST, excl. shipping costs
Qty

Plastic, Vinyl and Rubber Care (400ml)

Plastic, Vinyl and Rubber Care (400ml)
Plastic, Vinyl and Rubber Care (400ml)
PROTOCHEM PRC 201 is A combination of mild, quickly evaporating solvents and stable, inert polymers which leave a non-staining, water-repellent film. It forms a protective film against color fading and hardening caused by the penetration of ozone, U.V. rays, and oxygen.

Availability: Big amount

Price: ₹ 300.00
incl. 18% GST, excl. shipping costs
Qty

Protochem MP 906 (550ml)

Protochem MP 906 (550ml)
Protochem MP 906 (550ml)

Protochem MP 906 is a premium anti-corrosion wax coating. It gives dry, green waxy film for heavy protection of part, which does not wash or wipe off during normal storage and handling. ProtochemMP906 gives soft waxy, crack-resistant fast-drying film which helps in long term corrosion protection for machined surfaces, molds, guideways, bearings, etc. subjected to long periods of storage, or adverse shipping conditions. Protochem MP906 can be easily removed with solvents.

Availability: Big amount

Price: ₹ 400.00
incl. 18% GST, excl. shipping costs
Qty

Silicone Mould Release Spray (400ml)

Silicone Mould Release Spray (400ml)
Silicone Mould Release Spray (400ml)
PROTOCHEM MR 202 Spray is general purpose silicone mold release aerosol spray. It is suitable for most general purpose applications where the post-mold painting is not required. This product contains high-quality silicone oil suitable for light to medium applications. It is a rapid drying, anti-stick mold release agent suitable for cold and hot molds. It increases the life of dies and molds, improves product surface finishes and reduces production times with its excellent anti-sticking properties.

Availability: Big amount

Price: ₹ 240.00
incl. 18% GST, excl. shipping costs
Qty

Solvent and Degreaser Spray (400ml)

Solvent and Degreaser Spray (400ml)
Solvent and Degreaser Spray (400ml)
PROTOCHEM SC 303 is a non-chlorinated ready to use solvent. It is a superior alternative to water-based degreasing chemicals designed to prevent the risk of corrosion during pre-cleaning of precision machine parts such as bearing, automobile parts. It is used for rapid removal of grease, oil, solvent-based inks and wax

Availability: Big amount

Price: ₹ 300.00
incl. 18% GST, excl. shipping costs
Qty

Welding Anti Spatter Spray (400ml)

Welding Anti Spatter Spray (400ml)
Welding Anti Spatter Spray (400ml)

Anti Weld Spatter is a no flash silicone based formula that provides a protective coating to aid in the removal of weld spatter and helps to keep welding tips and nozzles clean. Prevents weld spatter from adhering to surrounding metals surfaces. Leaves a transparent, light yellow, tacky film that visually certifies proper coverage. High temperature based anti weld spatter.
Prevents spatter adhesion on base metal, thus eliminating grinding and chiseling. This product is highly heat-resistant and flame proof when applied as directed. Easily removed when welding is completed.

Availability: Big amount

Price: ₹ 212.00
incl. 18% GST, excl. shipping costs
Qty
up
Shop is in view mode
View full version of the site
Ecommerce Software